TLV320AIC3106IRGZR TI
Disponibile |
TLV320AIC3106IRGZR TI
• Stereo audio DAC: – 102-dBA signal-to-noise ratio – 16-, 20-, 24-, 32-bit data – Supports rates from 8 kHz to 96 kHz – 3D, bass, treble, EQ, de-emphasis effects – Flexible power saving modes and performance are available
• Stereo audio ADC: – 92-dBA signal-to-noise ratio – Supports rates from 8 kHz to 96 kHz – Digital signal processing and noise filtering available during record
• Ten audio input pins: – Programmable in single-ended or fully differential configurations – 3-state capability for floating input configurations
• Seven audio output drivers: – Stereo fully differential or single-ended headphone drivers – Fully differential stereo line outputs – Fully differential mono output
• Low power: 15-mW stereo 48-kHz playback with 3.3-V analog supply
• Ultralow-power mode with passive analog bypass
• Programmable input/output analog gains
• Automatic gain control (AGC) for record
• Programmable microphone bias level
• Programmable PLL for flexible clock generation
• Control bus selectable SPI or I2C
• Audio serial data bus supports I2S, left- and rightjustified, DSP, and TDM modes
• Alternate serial PCM, I2S data bus for easy connection to Bluetooth™ module
• Concurrent digital microphone and analog microphone support available
• Extensive modular power control
• Power supplies: – Analog: 2.7 V–3.6 V – Digital Core: 1.65 V–1.95 V – Digital I/O: 1.1 V–3.6 V
• Packages: 5.00 mm × 5.00 mm 80-pin VFBGA; 7.00 mm × 7.00 mm 48-pin VQFN
• Stereo audio DAC: – 102-dBA signal-to-noise ratio – 16-, 20-, 24-, 32-bit data – Supports rates from 8 kHz to 96 kHz – 3D, bass, treble, EQ, de-emphasis effects – Flexible power saving modes and performance are available
• Stereo audio ADC: – 92-dBA signal-to-noise ratio – Supports rates from 8 kHz to 96 kHz – Digital signal processing and noise filtering available during record
• Ten audio input pins: – Programmable in single-ended or fully differential configurations – 3-state capability for floating input configurations
• Seven audio output drivers: – Stereo fully differential or single-ended headphone drivers – Fully differential stereo line outputs – Fully differential mono output
• Low power: 15-mW stereo 48-kHz playback with 3.3-V analog supply
• Ultralow-power mode with passive analog bypass
• Programmable input/output analog gains
• Automatic gain control (AGC) for record
• Programmable microphone bias level
• Programmable PLL for flexible clock generation
• Control bus selectable SPI or I2C
• Audio serial data bus supports I2S, left- and rightjustified, DSP, and TDM modes
• Alternate serial PCM, I2S data bus for easy connection to Bluetooth™ module
• Concurrent digital microphone and analog microphone support available
• Extensive modular power control
• Power supplies: – Analog: 2.7 V–3.6 V – Digital Core: 1.65 V–1.95 V – Digital I/O: 1.1 V–3.6 V
• Packages: 5.00 mm × 5.00 mm 80-pin VFBGA; 7.00 mm × 7.00 mm 48-pin VQFN
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.